15

2023

-

06

Pre-coating film relative to the more prominent advantages

Author:


If the pre-coating film is used for coating, it can effectively prevent bubbles or demoulding of the coated product.
That is, the common point of foaming and stripping of film products processed by gluing wet composite process is that the film is separated from the matrix of paper printed matter, which destroys the tightness and smoothness of paper/plastic composite.
Just different forms of expression. Blistering is the emergence of needle tips, rice grains, stripes, cracks and other shapes of local void. Delamination is a large area or the whole paper, plastic separation.
Careful analysis of various manifestations of the accident cases, "film length", "glue hair sticky" is a basic law. The reason for the change of "film length" and "adhesive hair" is that there is a large amount of organic solvent in the adhesive used in the wet composite process.
These organic solvents cannot be fully utilized in the production process, and remain in the adhesive layer, which is compounded by film and paper prints.
The organic solvent remaining in the adhesive layer is constantly moving in the paper/plastic composite. The movement of organic solvent molecules is carried out simultaneously in different directions in order to escape from the glue layer matrix and volatilize to the atmosphere.
One part moves in the middle of the adhesive layer to soften the adhesive and make the adhesive sticky. The other part is interspersed with the adhesive layer and moves to the paper to form diffusion in the ink printing layer and destroy the adhesion and penetration of ink to the paper;
There is also a part of the film through the glue layer, to the film movement, blocked after gathering on the inner surface of the film, the film to produce swelling, so that it becomes longer, local convex bubble.
The softening of the glue reduces the thermosetting adhesive force of the polymer material; the diffusion and dispersion of the ink causes damage to the paper adhesion; the swelling of the film becomes longer, and it must stretch to the outside and separate from the paper print matrix.
The use of glue wet composite process, or early or late, or light or heavy, will inevitably appear blistering or stripping.
There is no solvent in the hot melt adhesive used for pre-coating. There is no effect of organic solvent on the softening of glue, the diffusion of ink, the swelling of film, etc. The thermoplastic adhesive force of the polymer material is generated after it is separated from the heat source, and it is firm and durable. Therefore, it can effectively prevent the occurrence of quality accidents such as foaming and stripping of film coated products.

Latest News

2026-07-18

AI-Powered Quality Inspection Implementation: Intelligent Technological Upgrade at the Thin-Film Factory

This article provides a comprehensive analysis of the logic behind AI‑driven quality inspection upgrades in the thin‑film industry, covering traditional pain points, the advantages of AI technology, practical application scenarios, and common pitfalls in technological transformation.

2026-07-17

Summer high-temperature winding challenges: core heating, adhesive layer sticking, glue migration, and end-face slippage.

Drawing on practical production experience from the summer season, this paper dissects the root causes of four major winding‑related faults and presents actionable process, equipment, and warehouse‑optimization solutions to help film manufacturers swiftly address high‑temperature winding challenges and reduce production losses.

2026-07-11

Why do most protective film rolls use plastic cores? A comprehensive analysis of the industry’s underlying selection logic.

This article dissects the key reasons for prioritizing plastic spools in protective film applications, examining four critical dimensions: production efficiency, quality control, long-term cost‑benefit analysis, and scenario suitability. It also contrasts the limitations of paper cores, distinguishes between mainstream plastic core materials, and outlines essential considerations to avoid common pitfalls in material selection.

2026-07-10

What are the common core types for film rolls? A comprehensive guide to selecting cores for different film materials.

This article systematically categorizes the mainstream types of film roll cores used in the industry, analyzes the advantages and disadvantages of each core type, identifies suitable film materials, and highlights key considerations for selecting the right core. Covering all major film categories—packaging, new energy, outdoor applications, and electronics—the guide helps film manufacturers and workshop process engineers quickly compare options and make informed choices.

2026-07-04

Semi-solid-state batteries are driving demand for composite separators; an analysis of high-temperature-resistant separator technologies.

This article, drawing on current mass-production technology roadmaps, key performance metrics, mainstream composite separator solutions, and selection criteria, provides a comprehensive analysis of the technical rationale behind high‑temperature‑resistant composite separators specifically designed for semi‑solid‑state batteries, offering practical, industry‑relevant insights for membrane manufacturers, battery procurement teams, and process engineers.