02

2021

-

11

Characteristics and application fields of PET pre-coating film

Author:


The full name of polyester is poly-ethylene glycol ester with high mechanical strength, high stiffness, impact resistance, good physical stability, heat resistance, oil resistance, good drug resistance, and corrosion resistance. It is resistant to organic solvents and resins. It has certain chemical resistance when it is not in contact with strong alkali. At the same time, polyester has high transparency and good gloss. Polyester film also has good gas barrier properties and good printing performance.

PET pre-coating film (polyester pre-coating film) is a laminated composite film formed by PET film (polyester film) and EVA hot melt adhesive. It has the characteristics of PET film and excellent composite properties.

PET pre coating film features:

1, has good light resistance, good physical stability;

2, waterproof, antifouling, wear resistance, chemical corrosion resistance, with a certain barrier;

3, smooth, high transparency, good stiffness;

4, environmental protection and safety, non-toxic, tasteless, no benzene, no foaming and stripping phenomenon during the film coating process;

5, can adapt to the rapid production of machinery;

6, wide applicability, can adapt to all kinds of paper products, imitation paper materials after printing plastic packaging.

Application fields of PET pre-coating film:

Used in food flexible packaging, gold and silver cardboard, high-grade wine boxes, cosmetics packaging, medicine boxes, gift boxes and books and magazines cover, advertising products coated industries. At the same time, because of its good printing performance, it can be combined with cardboard or non-woven fabric, and applied to heat insulation pad, flower packaging film, color composite card, etc.

Latest News

2026-07-18

AI-Powered Quality Inspection Implementation: Intelligent Technological Upgrade at the Thin-Film Factory

This article provides a comprehensive analysis of the logic behind AI‑driven quality inspection upgrades in the thin‑film industry, covering traditional pain points, the advantages of AI technology, practical application scenarios, and common pitfalls in technological transformation.

2026-07-17

Summer high-temperature winding challenges: core heating, adhesive layer sticking, glue migration, and end-face slippage.

Drawing on practical production experience from the summer season, this paper dissects the root causes of four major winding‑related faults and presents actionable process, equipment, and warehouse‑optimization solutions to help film manufacturers swiftly address high‑temperature winding challenges and reduce production losses.

2026-07-11

Why do most protective film rolls use plastic cores? A comprehensive analysis of the industry’s underlying selection logic.

This article dissects the key reasons for prioritizing plastic spools in protective film applications, examining four critical dimensions: production efficiency, quality control, long-term cost‑benefit analysis, and scenario suitability. It also contrasts the limitations of paper cores, distinguishes between mainstream plastic core materials, and outlines essential considerations to avoid common pitfalls in material selection.

2026-07-10

What are the common core types for film rolls? A comprehensive guide to selecting cores for different film materials.

This article systematically categorizes the mainstream types of film roll cores used in the industry, analyzes the advantages and disadvantages of each core type, identifies suitable film materials, and highlights key considerations for selecting the right core. Covering all major film categories—packaging, new energy, outdoor applications, and electronics—the guide helps film manufacturers and workshop process engineers quickly compare options and make informed choices.

2026-07-04

Semi-solid-state batteries are driving demand for composite separators; an analysis of high-temperature-resistant separator technologies.

This article, drawing on current mass-production technology roadmaps, key performance metrics, mainstream composite separator solutions, and selection criteria, provides a comprehensive analysis of the technical rationale behind high‑temperature‑resistant composite separators specifically designed for semi‑solid‑state batteries, offering practical, industry‑relevant insights for membrane manufacturers, battery procurement teams, and process engineers.